X-Core - Hunter Quick Check Diagnostics

FAQs
Troubleshooting

This feature allows you to quickly diagnose wiring problems with your controller. Instead of having to check each field wiring circuit for potential problems, you can use the Hunter Quick Check circuit test procedure. To initiate the Quick Check test procedure:

1

With the dial in the RUN position, press the plus (+), minus (-), left (<) arrow  and right (>) arrow buttons simultaneously.  In a few seconds the LCD will display all segments.
 

Press the plus (+) button once to begin the Quick Check procedure. Within seconds, the system searches all stations for detecting any circuit problems. When a field wiring short is detected, an ERR symbol preceded by the station number will momentarily flash on the display. After the Quick Check completes running the circuit diagnostic procedure, the controller returns to the automatic watering mode.

NOTE: The Quick Check procedure does not detect open circuits or cut wires.
 

还需要帮助吗？我们随时为您提供服务。

告诉我们您需要什么支持，我们将为您找到最佳解决方案。

联系客服

Find Hunter