Solar Sync - Station too Wet or too Dry

One station:

At any time you can simply increase or decrease Run Time to any individual station in the host controller and that station will adjust up and down with all the rest of the stations from a new level.

All stations:

Use the water + and - feature on the Solar Sync module to adjust the percentages applied to the controller. The Solar Sync comes from the factory set at 5 and can be adjusted from 1-10 with 10 giving you a higher percentage and 1 giving a lower percentage adjustment.

Seasonal Adjust too low: Increase the value on the Water Adjustment scale (10 is max). Once the setting is changed, the controller will immediately be updated with the new Seasonal Adjust %. Increase the Water Adjustment setting until the desired Seasonal Adjust % is shown. If you max out the Water Adjustment scale at 10 and still require more Seasonal Adjust, move down to the next lower Region (from Region 4 to 3, for example).
Seasonal Adjust too high: Decrease the value on the Water Adjustment scale (default setting is 5). Once the setting is changed, the controller will immediately be updated with the new Seasonal Adjust %. Decrease the Water Adjustment setting until the desired Seasonal Adjust % is shown. If you minimize the Water Adjustment scale down to 1 and still require a reduction in Seasonal Adjust, move up the next Region (from Region 2 to 3, for example).