Pro-c - Upgrading to Wi-Fi

The PRO-C model controller must be a model with a date code of March 2014 or newer.  This date code is written on the white sticker inside the wiring compartment. Ensure you have a strong Wi-Fi signal. Wi-Fi connectivity can be tested on the HPC panel (signal strength is shown when selecting a wireless network).  Please verify all Wi-Fi specifications if you have any issues connecting the controller to the router. Learn More

PC-400 (Blue Buttons) CompatibleP2C-400 (Blue Buttons) CompatiblePC-300 (Green Buttons) Not Compatible

NOTE: The compatible ribbon design in this panel should have two rows of pins.  The single row of pins would also indicate a panel that is not compatible. 

Remove Pro-C Face Panel

  1. Turn the power off using the slide bar inside the wiring compartment.
  2. Remove ribbon cable.
  3. Press down on the white hinge release button.
  4. Remove face panel.

Install HPC-FP Face Panel

  1. Press blue hinges together and attach a new HPC panel.
  2. Reconnect ribbon cable.
  3. Close and turn the power on.
STEPS

                                                                         

For information on the complete setup in the application, please visit our USING THE APP support section.

 

Vous avez toujours besoin d'aide ? Nous sommes à votre disposition.

Dites-nous de quoi vous avez besoin et nous trouverons la solution qui vous convient le mieux.

Contacter l'assistance

Find Hunter