MP Strip Performance Data | Hunter Industries

MP Rotator Performance Data Side Strips

	MP-LCS-515: Ivory, MP Left Corner Strip MP-RCS-515: Copper, MP Right Corner Strip MP-SS-530 Brown, MP Side Strip
Arc	Pressure	Radius	Flow		Precip in/hr
	PSI	ft	GPM	GPH
Left Strip	30	4 x 14	0.17	10.2	1.17	0.58
	35	5 x 15	0.18	10.8	0.92	0.46
	40	5 x 15	0.19	11.4	0.98	0.49
	45	5 x 15	0.21	12.6	1.08	0.54
	50	5 x 16	0.23	13.8	1.11	0.55
	55	6 x 16	0.24	14.4	0.96	0.48
Right Strip	30	4 x 14	0.17	10.2	1.17	0.58
	35	5 x 15	0.18	10.8	0.92	0.46
	40	5 x 15	0.19	11.4	0.98	0.49
	45	5 x 15	0.21	12.6	1.08	0.54
	50	5 x 16	0.23	13.8	1.11	0.55
	55	6 x 16	0.24	14.4	0.96	0.48
Side Strip	30	4 x 28	0.33	19.8	1.13	0.57
	35	5 x 29	0.36	21.6	0.96	0.48
	40	5 x 30	0.38	22.8	0.98	0.49
	45	5 x 31	0.41	24.6	1.02	0.51
	50	6 x 32	0.44	26.4	0.88	0.44
	55	6 x 33	0.47	38.4	0.92	0.46
Bold = Recommended pressure Note: Strip pattern radius can be adjusted by 25%. MP Rotator is designed to maintain matched precipitation after radius adjustment. Optimal pressure for the MP Rotator is 40 PSI. This can easily be achieved by using the MP Rotator with the Hunter PRS40 Spray Body, pressure regulated at 40 PSI. To match the precipitation rate of Standard MP Rotator models, use single-row or triangular spacing. To match the precipitation rate of MP Rotator MP800 Nozzles, use rectangular spacing.