Hydrawise- Manually Running a Zone

You can run an irrigation zone on demand from the Pro-HC Controller.

Running a zone manually from the controller

From the Home screen, navigate to the Zone Summary screen by pressing Zones.

  1. GREEN indicates a zone with a scheduled runtim
  2. GOLD indicates a Master Valve (if configured)
  3. View Previous 6 Zones (if available)
  4. BLUE indicates that this zone is currently running
  5. GREY indicates a zone without a scheduled runtime
  6. View Next 6 Zones (if available)
  7. Range of Zones you are viewing

The Zone summary screen shows the status of 6 zones at a time. To view the next or previous group of zones use the Next and Previous buttons. The current range of zones that you are viewing is indicated at the top of the screen.

From the Zone Summary screen touch the zone you wish to view.

  1. Zone Name
  2. Press to Start or Stop To Manually Modify a Zone
  3. Next Run Time and Length
  4. Current measured for Zone (12 Zone Pro only)
  5. Water Usage (if configured)
  6. Sensor State (if configured)
  7. Type of Watering Schedule
  8. Current Zone Number

From the Zone Status screen you can manually start a zone using the Run Now button. When started, the zone will run for the zone’s default configured run length. This can be overridden by clicking on Run Time prior to manually starting the zone.

When a zone is running the Run Now button will change to Stop, allowing you to stop a running zone.

The zone will start running within a few seconds.

По-прежнему нужна помощь? Мы к вашим услугам!

Изложите свой вопрос, и мы постараемся найти для вас оптимальное решение.

Запрос в службу поддержки