Yes, if you know the model of the existing manufacturer's sprinkler, you can use our Replacement Charts to find the appropriate Hunter pop-up or rotor that will have a similar flow and distance range. Hunter has rotors and sprinklers to fit all …

Spray Body - Check Pressure …

Native plant restoration projects and subsurface drip irrigation systems often require temporary overhead watering to support delicate plants. To simplify temporary irrigation, two preassembled stake kits are available for use with high-efficiency MP …

MP Rotator Nozzles are shipped from the factory at the maximum radius setting and with the following arc settings: MP Rotator Model Factory-Set Arc 90° to 210° 180° 210° to 270° 210° 360° Full Circle MP Corner 45° MP Side Strip 180° MP Left Corner Strip …

You can't shutoff the spray on the MP Rotator Nozzle using the radius adjustment screw. To shut off spray to one head within a zone, you need to cap off the head at a PVC level or install a Pro-Spray Shutoff Cap (P/N 213600SP), if a Pro-Spray head is …

The MP Rotator's coverage distance depends on incoming pressure. You may not have the correct pressure if you are not achieving the desired distance. … If the distance of coverage is short, you may have low pressure. First, check if your valve has a flow …

MP Rotator nozzles have a lower precipitation rate than typical spray nozzles, so your run times may need to be lengthened compared to traditional sprays. Run times with the MP Rotator Nozzle should be two to three times longer than a standard spray zone …

With MP Rotator Nozzles, 80% of the filter can be plugged without a performance drop. MP Rotator Filters can be removed for cleaning and/or replacement. Please view the chart below for more details on each of the filter sizes. MP Model Filter P/N …

Hunter's MP Rotator is the innovative streaming nozzle that has quickly become the irrigation industries favorite. Multi-trajectory water streams qualify the MP Rotator as a streaming nozzle. Here are a few of the MP's features: Multi-trajectory rotating …

Use MP Rotator tools and accessories to optimize the uniformity and overall efficiency of irrigation systems. The MP Rotator Gauge, for instance, measures system pressure at the sprinkler to demonstrate the MP Rotator Nozzle's ability to save water.  If …

If your MP Rotator Nozzle is not rotating, there may be debris in the nozzle. Remove the nozzle to inspect and clean the filter screen. Replace the nozzle and turn the valve on to run the sprinklers. Increase the radius to its largest adjustment by …

The MP Rotator Standard Nozzle Family has a matched precipitation rate of approximately 0.4 in/hr (10 mm/hr). This means any MP Rotator Standard model at any arc or radius can be placed in the same zone. The MP800 Family has a precipitation rate of …