Over the last few years we've had several customers call with questions regarding the effects of oil-based pipe dope compounds on the threads of Hunter sprinklers. In case you were unaware, the two are not meant to go together and the end result is …

A blank nozzle is available as part of the Low-Angle Nozzle Set (PGP-ADJ P/N: 233200 & PGP Ultra/I-20 P/N:356605SP) , which can be inserted into the rotor to shut off the flow of water. The riser will still pop up as if the rotor is going to water so be …

If your Hunter SRC controller’s display reverts back to the current time after trying to manually activate stations, it has more than likely undergone a power surge or is experiencing a technical anomaly. Most likely this controller will need to be …

Regulating pressure saves water and extends the life of the irrigation system. Water savings is achieved by operating each zone at the best pressure for that equipment and application type. Accu-Sync ensures that every zone in every system stays in check …

While most of the time the distance between the controller and pump start relay doesn't create any problems, every once in a while the wires on the 24V coil can allow electromagnetic noise to travel back to the controller. This noise is made when the …

X-Core Selecting Specific Days of the Week to Water …

Flow sensors can potentially be damaged by winterization blow-out techniques, and should be removed prior to injecting compressed air into the pipes. Hunter Flow Sync and Flow-Clik sensors are installed in FCT tee fittings. The flow sensor itself includes …

    After programming is complete, turn the dial to the RUN position to enable automatic execution of all selected programs and start times. … Pro-C - Automatic …

Commercial Rotors - I-40 Rotor Nozzle Installation Instructions …

The Eco-Logic is factory configured with 3 independent programs (A , B , C with four start times each) for different plant type requirements. The  Eco-Logic  can be customized to display only the required programs. You can hide those programs that are not …

  Valves currently watering will be shut off after the dial is turned to the SYSTEM OFF position for two seconds. The display will be flashing OFF. All active programs are discontinued and watering is stopped. To return the controller to normal automatic …

The NODE allows the user a simplified method for running a test program. This feature will operate each station in numerical sequence, from lowest to the highest. … Make sure the controller is in Idle Mode. Press and hold the PRG button until the icon is …

Remotes - Quick Start …

The difference between the Mini-Clik and the Rain-Clik is that the Mini-Clik adjusts for rainfall of 1/8" to 1". As the moisture-laden disks expand, they will eventually activate a switch that interrupts the circuit from the controller to the solenoid …

If the right side of the arc is not properly aligned, the results may be a wet walkway or a dry turf area. The right side arc can easily be realigned.  NOTE:  Prior to making the right side adjustment, make sure the top turret is reset. Rotate the turret …

The PSR-B was developed to provide a solution for irrigation controller and pump start relays installations that have insufficient power to energize the pump relay. A common cause for this problem is the use of too small a wire size for the distance from …

Radio Antenna   – Transmits a wireless signal to the receiver up to 800 ft. (275m). It is recommended that the antenna be oriented vertically Vent Ring    – Used to adjust the reset rate or dry out time for the sensors. Opening the vents will decrease the …

Each wireless transmitter is produced with a unique address. A receiver must learn this address to work with that transmitter. This step is only necessary if transmitters and receivers are purchased separately. Note: Units purchased as a kit will already …

The battery in the Wireless Rain-Clik™ Transmitter is designed to operate for the life of the sensor by providing a sealed, maintenance-free design. The transmitter is available as a replacement part (WRCLIK-TR). Should you need to change the transmitter, …

The stainless steel option on Hunter rotors offers mutliple benefits, here are a few: Vandal Resistance - Parks and other common ground areas that have heavy foot traffic can sometimes create vandal issues with sprinklers, the stainless steel option adds …

Commercial Rotors - I-25 Rotor Nozzle Installation …

… The wired Hunter Rain-Clik can be ran up to 200 feet from the controller. Once the Rain-Clik is mounted, run the wire to the controller, and fasten it every few feet with wire clips or staples for best results. View the wired Rain-Clik installation …

The Rain-Clik can keep the irrigation system from starting or continuing after rainfall. The time that it takes the Rain-Clik to reset for normal sprinkler operation after the rain has stopped is determined by weather conditions (wind, sunlight, humidity, …

Remotes - Turning on Multiple Stations …