The Hydrawise irrigation system is made free for users worldwide. But for customers who want to further optimize their system, or provide management

Turning a controller off from the app stops all scheduled watering and prevents any irrigation from occurring until it is turned back on in the app

A program will show you when, where, and how long to water. It's helpful to break up your watering into different programs that water similar types of

Centralus: Irrigation Management Platform for ICC2 Controllers You must have a valid Hunter account to continue to Centralus, so let’s take a minute to

Rain Clik - Rain Sensor Not Turning Off the Sprinklers You can manually test proper operation of the rain sensor by using the One Touch Manual Start

X-Core - Station Repeats A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program

X-Core - System Off The X-Core controller will not water manually or automatically with the dial in the system off position. Valves currently watering

SP ERR or ERR Message CAUSE - Noise entering the controller through the “SmartPort” wiring or it is wired incorrectly. SOLUTION - A few steps are

Pro-C - Station Repeats A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is

X-Core - "NO AC" on Display The "NO AC" display is a diagnostic message telling you that the controller has stopped receiving AC power. The controller

X-Core - Flashing Sprinkler Icon, No Zones Running If the controller display shows a station running, flashing sprinkler icon, or arrow pointing towards

Station # ERR Message CAUSE - The Station # ERR (for example 1 ERR) is a diagnostic message that appears when your controller is detecting a fault on

Pro-C - "NO AC" on Display The "NO AC" display is a diagnostic message telling you that the controller has stopped receiving AC power. The controller is

Pro-C - No Display First, make sure there is power to the controller's outlet. Use a test lamp or any other 110VAC device to determine if there is

Pro-C - Flashing Sprinkler Icon, No Zones Running If the controller display shows a station running, flashing sprinkler icon, or arrow pointing towards

Pro-C - Not Recognizing Correct Stations If your Pro-C controller is not recognizing all of your stations in the "Set Station Run Times" or "Run Times"

Outdoor mounted controllers: Leave the power on and the dial / switch in the "OFF" position. The heat from the transformer will keep the enclosure warm