We’ll show how to set up a typical wire and valve locator, how to locate a valve, track and mark the wire location to aid in troubleshooting wiring

Once you’ve determined that the controller and valve are working properly, you need to take a closer look at the wiring to determine where the problem

In this video, we’ll cover typical grounding specifications; two-wire decoder system grounding; Hunter ICD decoder grounding; using the Dual-S surge

When you are looking for a bad wire, testing a solenoid's health, or testing the power output from an irrigation controller, it is essential to have the

We’ll be going over the basic functions of a voltmeter and how you can use it in locating problems within your irrigation system. We’ll be talking about

Rain Clik - Rain Sensor Not Turning Off the Sprinklers You can manually test proper operation of the rain sensor by using the One Touch Manual Start

X-Core - Station Repeats A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program

X-Core - System Off The X-Core controller will not water manually or automatically with the dial in the system off position. Valves currently watering

X-Core - "NO AC" on Display The "NO AC" display is a diagnostic message telling you that the controller has stopped receiving AC power. The controller

X-Core - Flashing Sprinkler Icon, No Zones Running If the controller display shows a station running, flashing sprinkler icon, or arrow pointing towards

A brief overview of how the Hunter Solar Sync works to convert most AC powered irrigation controllers to smart control. Learn why the Solar Sync saves

Learn more about the Hunter X-Core residential irrigation controller with up to 8 station capacity and water conservation features, including smart

Learn how to easily adjust days to water, change program start times, and adjust run times for each individual station or zone of a Hunter X-Core

Learn to wire your Soil-Clik moisture sensor with Hunter's Pro-C, X-Core, I-Core, and ACC irrigation controllers. Soil-Clik can also be installed on non

An irrigation system that is repeating the cycle and continuously watering most likely has too many start times programmed into the controller. This

This video will teach you how to program your controller to water every other day by selecting odd or even days of the week to water. You will also

One of the most common reasons for a sprinkler system to water intermittently and show the word DELAY on the display is because a delay time was

If want to clear the memory on your controller and start from fresh or if your controller is not responding to your commands, this video will show you

Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It

Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It

Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It

Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It

If your display is blank, unreadable, or if it is showing symbols that do not make any sense, this video will teach you how to troubleshoot the display.

Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations