Pilot-FC
Models
Specifications
POWER SUPPLY INPUT
- Supply wires must be 1,85 mm2 or larger
- 120/230 VAC at 60/50 Hz
- 2 amps maximum at 120 VAC
- 1 amp maximum at 230 VAC
POWER SUPPLY OUTPUT
- Station output: 0.56 amps at 24 VAC
- 24 VAC Hot Post™ output: 420 mA at 24 VAC
- Solenoid capacity: 3 standard 24 VAC Hunter golf valve-in-head rotors per output, 18 maximum simultaneous stations
RADIO SYSTEMS
- UHF Radio: 450-475 MHz
- License Free Radio: 915MHz (US) and 2,4GHz (international)
- Hardwire
WIRED SYSTEMS
- GCBL: Shielded two twisted pairs, 0,82 mm2
- GCBLA: Armored, shielded two twisted pairs, 0,82 mm2
Videos
Features
The Pilot field controller manages up to 80 stations in 10-station increments. The full-featured controller has everything you need in a stand-alone field controller.
For a fully automated, flow-optimized system network all your controllers together with Pilot-CC central control software. Communication options include wired, UHF radio and two license-free frequencies. Power options include both 120 VAC and 230 VAC. Advanced troubleshooting features like a UHF radio signal strength meter and extensive system and error logging are complimented by Hunter’s Safety-Toggle™ station switches.
To make things even easier, the only service tool required is a phillips screwdriver – and you don’t even have to bring it with you because we include one with every controller.
Key Benefits
Advanced Features
The large, illuminated keypad with a backlit display includes convenient function buttons for the most commonly used features. Built in system diagnostics make troubleshooting your system a breeze.
In addition to control panel indications, diagnostic lights on controller modules visually tell you if stations are running, station outputs have overloaded and much, much more.
The only tool required is a Phillips screwdriver and you don't even have to bring one because we include it with every controller.
Colour-coded modular components with captured screws so they won't get lost, making it easy to assemble and troubleshoot. Safety-Toggle station switches ensure station cannot be accidentally left on. Any time they are used Pilot logs the fact so you always know what has happened.
No exposed circuitry or loose wires. All circuit boards are encapsulated in polyurethane to protect them from moisture, insects and temperature extremes. The horizonal alignment of station wire terminals makes wiring up the controller a snap. We even include zip tie anchors to help keep wiring neat and out of the way.
Charts
|
|
|
|
|---|---|---|
| PILOT-FC Plastic Pedestal | PILOT-FI Field Interface * | |
| Height | 100 cm | 30 cm |
| Width | 60 cm | 30 cm |
| Depth | 44 cm | 11 cm |
| Weight | 32 kg | 2 kg |
| * One Pilot-FI is required with any central control system to link the central computer to the field equipment | ||
Documents
Select Type
- All Documents
- Manuals
- Marketing
- Specifications
- Replacement Parts
Compatible Products
Pilot Central Control software simplifies management of your irrigation system with a wide range of advanced features. It safely balances sprinkler demand with water and electrical supply for the most efficient irrigation cycles possible.
Underground decoder systems are easy and inexpensive. They use significantly less wiring than field controller systems and require much less time to install.