The system off function will turn your WVC controller off, stopping all automatic watering until turned back on with your WVP.
To Turn the WVC off:
- Use the
button until the off 
icon is displayed. After flashing for a few seconds, the word “OFF” will appear in the display. - Squeeze the Transmit/Receive button on the WVP once to move to communication mode (lower part of LCD), use the
and 
buttons to make sure the arrow is pointed toward the WVC icon, then squeeze and hold the Transmit/Receive button on the WVP. The WVP will beep twice indicating that the “OFF” command is being sent to the WVC. It will beep twice again indicating the command was successfully received by the WVC.
To Turn the WVC On:
- While in the programming mode (upper part of the LCD), press the
button until the current time and day is displayed. - Squeeze the Transmit/Receive button once to move to communication mode (lower part of LCD), use the
and 
buttons to make sure the arrow is pointed toward the WVC, then squeeze and hold the Transmit/ Receive button on the WVP. The WVP will beep twice indicating that the “ON” command has been sent to the WVC. It will beep twice again indicating the command was successfully received by the WVC.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.