The BTT-200 controller offers two modes for programming within the app: TIMER mode and CYCLING Mode.
- Timer mode allows watering at four different start times from 1 second to 24 hours (23 hrs., 59 min, 59 sec) per watering day.
- Cycling mode allows the Run Time to repeat continually after the scheduled interval (Soak Time) from a Start Time to an End Time.
Timer Mode
- Press the SCHEDULE Icon.
- Select the PENCIL icon to edit the zone.
- Select the desired WATER DAYS. Select one option of specific water days, interval, or Odd/Even days.
- Specific Days to Water Mode - Select days of the week to water. Click SAVE.
- Odd/Even Mode - Select Odd or Even. Click SAVE.
- Interval Mode - Select the days between watering (1-31). Select when you would like the interval to start. Click SAVE.
- Interval Note: The Days Until Next Water feature allows the user to start this interval today or between 1-30 days.
- Set a START TIME. Click SAVE.
- Optional START TIMES 2, 3, and 4 will repeat the program.
- Set the desired RUN TIME from 1 second to 24 hours (23 hrs., 59 min, 59 sec). Click SAVE.
Repeat steps for a second zone if applicable. The Time and Date are set on the mobile device.
IMPORTANT: The COPY TIMER SCHEDULE icon at the bottom will allow you to duplicate the programming for the opposite zone.
Cycle Mode
- Press the SCHEDULE Icon.
- Select the PENCIL icon to edit the zone.
- Select the CYCLING tab.
- Select the desired WATER DAYS. Select one option of specific water days, interval, or Odd/Even days.
- Specific Days to Water Mode - Select days of the week to water. Click SAVE.
- Odd/Even Mode - Select Odd or Even. Click SAVE.
- Interval Mode - Select the days between watering (1-31). Select when you would like the interval to start. Click SAVE.
- Interval Note: The Days Until Next Water feature allows the user to start this interval today or between 1-30 days.
- Set START TIME 1 and click SAVE.
- Set END TIME 1 and click SAVE. If additional start times are required, repeat steps 5 and 6.
- Set END TIME 1, if applicable, an optional END TIME 2. Click SAVE.
- Set the desired RUN TIME from 1 second to 24 hours (23 hrs., 59 min, 59 sec). Click SAVE.
- Set optional SOAK TIME. This is the time between each Run Time, from 1 second to 24 hours (23 hrs., 59 min, 59 sec). Click SAVE.
- Select OFF if soak time is not desired. If no soak time is selected, BTT will run continually from Start to End time.
Repeat steps for a second zone if applicable. The Time and Date are set on the mobile device.
IMPORTANT: The COPY CYCLING SCHEDULE icon at the bottom will allow you to duplicate the programming for the opposite zone.
¿Aún necesita ayuda? Estamos aquí.
Díganos en qué necesita ayuda y encontraremos la mejor solución para usted.