Offline Programming will allow the controller to run like our traditional controllers, the X-core and the Pro-C models. Each of the six programs (a-f) enables you to start each program up to six times a day, set run lengths, and set specific days to water.
To set up your controller for manual configuration, please follow the steps below:
- From the main menu, click on Settings.
- Select Config.
- Select Factory Default.
- Select Erase Config. This will reset the controller back to factory settings. You will be presented with a warning dialogue.
- Select Configure Offline and begin the wizard steps. Click Ok.
Shortcut steps are available below based on the programming mode.
Standard Mode (Recommended)
| OFFLINE STANDARD MODE | |
|---|---|
| Adjust Time: | Home > Settings > Offline Programs and Settings >Time |
| Enable Wi-Fi: | Home > Settings > Offline Programs and Settings > Enable Wi-Fi |
| Program Sensor/Check Status: | Home > Settings > Offline Programs and Settings > Sensors > Configure to level type for normally closed style. |
| Start Times: | Home > Settings > Offline Programs and Settings > Offline Programs > Edit Start Times |
| Water Days: | Home > Settings > Offline Programs and Settings > Offline Programs > Edit Water Days |
| Zones: | Home > Settings > Offline Programs and Settings > Offline Programs > Edit Zones |
| Master Valve: | Home > Zones > Zone > Click blue bar > Select Master Valve > Confirm |
| Set Seasonal Adjust: | Home > Settings > Offline Programs and Settings > Seasonal Adjust |
Advanced Mode
| OFFLINE ADVANCED MODE | |
|---|---|
| Adjust Time: | Home > Settings > Offline Programs and Settings >Time |
| Enable Wi-Fi: | Home > Settings > Offline Programs and Settings > Enable Wi-Fi |
| Program Sensor/Check Status: | Home > Settings > Offline Programs and Settings > Sensors |
| Start Times: | Home > Settings > Offline Programs and Settings > Offline Programs > Edit Start Times |
| Water Days: | Home > Settings > Offline Programs and Settings > Offline Programs > Add or Modify |
| Zones: | Home > Zones > Choose Zone > Run Time > OK |
| Master Valve: | Home > Zones > Zone > Click blue bar > Select Master Valve > Confirm |
| Set Seasonal Adjust: | Home > Settings > Offline Programs and Settings > Seasonal Adjust |
¿Aún necesita ayuda? Estamos aquí.
Díganos en qué necesita ayuda y encontraremos la mejor solución para usted.