The BTT-200 controller offers two modes for programming within the app: TIMER mode and CYCLING Mode.
- Timer mode allows watering at four different start times from 1 second to 24 hours (23 hrs., 59 min, 59 sec) per watering day.
- Cycling mode allows the Run Time to repeat continually after the scheduled interval (Soak Time) from a Start Time to an End Time.
Timer Mode
- Press the SCHEDULE Icon.
- Select the PENCIL icon to edit the zone.
- Select the desired WATER DAYS. Select one option of specific water days, interval, or Odd/Even days.
- Specific Days to Water Mode - Select days of the week to water. Click SAVE.
- Odd/Even Mode - Select Odd or Even. Click SAVE.
- Interval Mode - Select the days between watering (1-31). Select when you would like the interval to start. Click SAVE.
- Interval Note: The Days Until Next Water feature allows the user to start this interval today or between 1-30 days.
- Set a START TIME. Click SAVE.
- Optional START TIMES 2, 3, and 4 will repeat the program.
- Set the desired RUN TIME from 1 second to 24 hours (23 hrs., 59 min, 59 sec). Click SAVE.
Repeat steps for a second zone if applicable. The Time and Date are set on the mobile device.
IMPORTANT: The COPY TIMER SCHEDULE icon at the bottom will allow you to duplicate the programming for the opposite zone.
Cycle Mode
- Press the SCHEDULE Icon.
- Select the PENCIL icon to edit the zone.
- Select the CYCLING tab.
- Select the desired WATER DAYS. Select one option of specific water days, interval, or Odd/Even days.
- Specific Days to Water Mode - Select days of the week to water. Click SAVE.
- Odd/Even Mode - Select Odd or Even. Click SAVE.
- Interval Mode - Select the days between watering (1-31). Select when you would like the interval to start. Click SAVE.
- Interval Note: The Days Until Next Water feature allows the user to start this interval today or between 1-30 days.
- Set START TIME 1 and click SAVE.
- Set END TIME 1 and click SAVE. If additional start times are required, repeat steps 5 and 6.
- Set END TIME 1, if applicable, an optional END TIME 2. Click SAVE.
- Set the desired RUN TIME from 1 second to 24 hours (23 hrs., 59 min, 59 sec). Click SAVE.
- Set optional SOAK TIME. This is the time between each Run Time, from 1 second to 24 hours (23 hrs., 59 min, 59 sec). Click SAVE.
- Select OFF if soak time is not desired. If no soak time is selected, BTT will run continually from Start to End time.
Repeat steps for a second zone if applicable. The Time and Date are set on the mobile device.
IMPORTANT: The COPY CYCLING SCHEDULE icon at the bottom will allow you to duplicate the programming for the opposite zone.
Ti serve ancora aiuto? Siamo qui per te.
Dicci di cosa hai bisogno e troveremo la soluzione migliore per te.