Pro-C - Setting Program Start Times

Installation Details

NOTE: In the Start Times dial position, the numbers 1-4 do not represent stations. The numbers represent the program start times. Each program can start up to 4 times on the set days to water. One start time will activate all stations sequentially in that program. If you want the stations to operate one time in sequential order and then not repeat, set start times 2, 3, and 4 to OFF. Multiple start times in a program can be used for separate morning, afternoon, or evening watering cycles. Start times may be entered in any order. The Pro-C will automatically sort them.

Turn the dial to the Start Times position. Press the PRG button to select A, B, or C.

Use the    and   buttons to change the start time. (Advances in 15-minute increments.) One start time will activate all stations sequentially in that program. This eliminates the need to enter a start time for each station.

Press the button to add an additional start time, or PRG button for the next program.

Example: Program A has four stations (1-4) assigned to it and the program has one start time at 5:30 AM. At 5:30 AM, station 1 will water, followed by station 2, then station 3, and so on until all four stations have watered. Start times should appear as you see in the chart below:

Start  Times PROGRAM A PROGRAM B PROGRAM C
1 5:30 AM OFF OFF
2 OFF OFF OFF
3 OFF OFF OFF
4 OFF OFF OFF

Individual stations are assigned to a program (A,B,C). Each program requires only one start time to initiate a watering sequence of all the stations assigned to that program. Start times are assigned to programs, not stations. The controller will operate the stations in numerical order. When a station has completed its watering time, the controller will switch to the next station in that program automatically.

Eliminating a Program Start Time

With the dial set to the START TIMES position, push the    and   buttons until you reach 12:00 AM (Midnight). From this position push the   button once to reach the “OFF” position. The “OFF” position is between 11:45 PM and 12:00 AM.

NOTE:
All stations operate in numerical order. Only one program start time is required to activate a watering program.
If a program has all four start times turned off, then that program is off (all other program details are retained).
Because there are no start times, there will be no watering with that program.

Ti serve ancora aiuto? Siamo qui per te.

Dicci di cosa hai bisogno e troveremo la soluzione migliore per te.

Contatta l'assistenza

Find Hunter