ACC2 - Smartport

The SmartPort® wiring harness is included with the ACC/ACC2 model controllers. This harness is designed to activate stations while on site using the ROAM or ROAMXL remote. 

 

 

Smartport Replacement

In the event this becomes damaged, this can be removed and replaced with a few simple steps. The replacement part number for this SmarPort® is 112200.

  1. Shut the power Off using the toggle switch at the base of the transformer.
  2. Remove the three Captive Screws from the power module using a Philips screwdriver (Fig. 1).
  3. Remove the white SmarPort® Plug by pulling it outward.
  4. Remove the 1/2" Locknut and slide the SmarPort® out from the controller.
  5. Repeat the steps above to replace it with a new SmarPort®.

Find a Distributor

Nadal potrzebujesz pomocy? Chętnie pomożemy.

Powiedz nam, w jakim zakresie potrzebujesz wsparcia, a my znajdziemy dla Ciebie najlepsze rozwiązanie.

Skontaktuj się ze wsparciem

Find Hunter