Hunter prefers the use of Hunter valves with a Hunter DC-latching solenoids (P/N #458200) for best performance, however, existing irrigation systems can be retrofitted with another manufacturer’s valve and solenoid. Hunter has tested and published a …

For best performance, pair a Hunter valve with a Hunter DC-latching solenoid (P/N #458200). However, existing irrigation systems can be retrofitted with another manufacturer's valve and solenoid. Hunter has tested and published a retrofittable …

Resetting the controller will erase the current program data and restart the controller. A reset does not, however, delete a program saved to permanent memory using the Easy Retrieve Memory feature to save a preferred program. …   From the Idle Mode …

     The SVC has been an exceptional battery operated controllers for many years. There are a number of advances within the new version Node controller. For starters, the Node utilizes two 9 volt batteries for extended battery life as compared to one …

A battery-operated controller sends a quick DC pulse to operate the solenoid, therefore the battery-operated controller requires a DC latching solenoid to operate correctly. Also, the DC latching solenoid will have one black wire for the common wire and …

The NODE allows the user a simplified method for running a test program. This feature will operate each station in numerical sequence, from lowest to the highest. … Make sure the controller is in Idle Mode. Press and hold the PRG button until the icon is …

A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the program an additional time. NOTE: In the Start Times  mode position, the numbers …