Module wires not properly connected to controller terminals. Wires from the Solar Sync module to the controller have been severed. Is the Solar Sync module installed on a controller that has the SOLAR SYNC dial position? If so, remove the module. … ERR …

One station: At any time you can simply increase or decrease Run Time to any individual station in the host controller and that station will adjust up and down with all the rest of the stations from a new level. All stations: Use the water + and - feature …

If the Solar Sync Seasonal Adjustment is too high or too low you may need to change the Water Adjustment feature on your controller or Solar Sync Module on older models. This will allow you to fine-tune your station Run Times to allow for more watering or …

  Cause The Solar Sync sensor is not connected to the controller The Solar Sync sensor wires may have a break in them or a bad connection Solution Connect the Solar Sync to the "SEN" positions on the wiring terminal - The display will then show the Region …

Cause The Solar Sync sensor is not connected to the controller The Solar Sync sensor wires may have a break in them or a bad connection Solution Connect the Solar Sync to the "SEN" positions on the wiring terminal - The display will then show the Region …

Seasonal Adjustment is used to make global run time changes without re-programming the entire controller. To use the Seasonal Adjustment feature: NOTE: The controller should always be initially programmed in the 100% position. … To view the adjusted run …

The X-Core is compatible with the Hunter Solar Sync. Solar Sync is a sensor system that will automatically adjust the X-Core controller’s watering run times (based on changes in local climate condition) by using the Seasonal Adjust function. The Solar …

The X-Core is compatible with the Hunter Wireless Solar Sync. Solar Sync is a sensor system that will automatically adjust the X-Core controller’s watering run times (based on changes in local climate condition) by using the Seasonal Adjust function. The …

For accurate Solar Sync measurements, the controller needs to be programmed for the average peak season ET for your region. Use the following table for choosing your region. You can use methods A, B or C to help you choose which region is best for your …

If a Solar Sync sensor has been installed on the X-Core controller then the seasonal adjust value used by the controller will be calculated from the weather data supplied by the Solar Sync sensor. If it is decided that the Solar Sync sensor will no longer …