If your sensor is not turning controller back on after a rain event, you may have debris in the spindle of the rain sensor.  Remove the spindle assembly to check for debris or damage to the disks.   … Pry upward on both sides of the middle stack of the …

HDL-PC & HDL-R - Emitter Line Maximum Length …

The Pro-C controller is supplied with a factory-installed base module for up to 4 stations on the PC-400 and up to 3 stations on the older PC-300. Additional modules may be added in increments of 3 stations (PCM-300), 9-station (PCM-900) or 16-station …

Hunter warrants the Wireless Rain-Clik (WR-CLIK) for five years. If a defect in a Hunter product is discovered during the applicable warranty period, Hunter will repair or replace, at its option, the product or the defective part. This warranty does not …

We recommend that a qualified licensed contractor perform this type of winterization method. The blowout method utilizes an air compressor with a cubic foot per minute (CFM) rating of 80-100 for any mainline of 2" or less. The compressor is attached to …

The chart below indicates the maximum wire runs that can be used when installing Hunter AC solenoid valves with controllers. The example in the chart below demonstrates the most commonly used wire size for station control and ground wire ( e.g.,12 AWG = …

With the Pro-C controller in production for 17 years, we have continuously upgraded it to accommodate innovative features. Below, you will find every panel we manufactured for the Pro-C model, including the NEW Wi-Fi replacement front panel. For …

Selecting Specific Days of the Week to Water For specific day of the week watering, the station number and 7 days of the week with a   icon or a   icon above the numbered day will be displayed. The     icon would represent an "ON" watering day, while …

Here is a list of the error codes and ways to troubleshoot them: X2 - Controller code CODE description SOLUTION FAIL Wi-Fi setup failed Check the spelling of the network name (SSID) and/or password and reconnect to Wi-Fi donE The previous operation is …

Emitter tool for punching pilot holes and pellets, inserting and removing an emitter, and cutting tubing. … HEMT - Hunter Emitter Multi-Tool … Dripline …

Emitter tool for punching a pilot hole, inserting, and removing an emitter. … Emitter tool for punching pilot holes and pellets, inserting and removing an emitter, and cutting tubing. … Pocket Punch … HEMT - Hunter Emitter Multi-Tool … Emitter …

The chart below indicates the maximum wire runs that can be used when installing Hunter AC solenoid valves with controllers. The example in the chart below demonstrates the most commonly used wire size for station control and ground wire ( e.g.,12 AWG = …

This feature permits the user to stop all programmed watering for a designated period from 1 to 7 days. At the end of the programmable rain off period, the controller will resume normal automatic operation.   … Press the button until the System Off icon …

With the current time/day showing in the display press and hold the button to display the Manual Watering icon. The station number will also be displayed. Use the button to navigate to the station that you would like to manually activate. Use the or …

The system off function will turn your WVC controller off, stopping all automatic watering until turned back on with your WVP. … Use the button until the off icon is displayed. After flashing for a few seconds, the word “OFF” will appear in the display. …

Some of the features of the WVP include: Simple, push button programming Large Liquid Crystal Display (LCD) with easy to under- stand icons Radio communication WVC controllers up to 100 feet away Operates on standard 9-volt alkaline battery …

The Automatic Flush Valve (AFV) allows debris to be flushed out of any dripline system. It is good practice to install an AFV at the end of any single dripline or grid of dripline. Flush the zone prior to use.  An AFV may be used for any dripline system …

Similar to a sprinkler head, the Eco-Indicator pops up to provide visual indication that a drip system is operating. The Eco-Indicator has a highly visible yellow stem that pops up when the system is running at a pressure of least 12 PSI (0.8 bar; 83 …

W e would prefer that you use a Hunter valve with a Hunter DC latching solenoid, but we realize that sometimes you may be retrofitting existing systems that have another manufacturer’s valves. We have done testing on the following solenoids and have found …

The trajectory and spray height of the water stream leaving a sprinkler nozzle is important information when designing and installing irrigation systems.  These spray nozzle trajectory charts are designed to help determine how close a sprinkler can be …

REL 2 is used to allow multiple controllers to operate the same low-voltage device (Master Valve or Pump Start Relay).  IMPORTANT: REL 2 is NEVER connected to high voltage. It is for 24VAC devices, only. Diagrams listed below: … … … Two Controllers With …

Metal controllers will include a hole plug assembly in a pre-drilled factory hole on top of the controller. Remove the nut on the inside of the controller to remove the plug. Route the cable through the pre-drilled hole and the antenna nut. Then tighten …

Turn off the controller power using the power switch on the transformer. … Remove the dust cover, or existing module, from the bottom rear of the controller facepack. Push up on the spring-loaded button and pull downward to remove. Slide in the new module …

Adding the controller to the Centralus software will require a few simple steps. You must have a free Hunter SSO account to add a controller. Learn More NOTE: If you see the message DEVICE ALREADY CLAIMED , please get in touch with the original …