The controller displays currently programmed active day schedule information. You can choose to water on specific days of the week, or you can choose interval watering, or choose to water on odd days or even days. Each program can operate using only one type of water day option.
Setting Watering Days
- Press the
button until the 
icon is displayed. - The program letter (A, B, or C) will be displayed.
- Arrows point at the specific days of the week in which watering will occur. Press the plus (+) or minus (-) buttons to scroll though the days.
- Press the plus (+) button to activate that day for the program displayed, or the minus (-) button to cancel watering for that day. The arrow will show on the watering days for the active program.
- Press the PRG button to set days to water for a different program, if desired.
- Press the button to proceed to the next programming function or allow controller to return to idle mode.
Selecting Odd/Even Days to Water
This feature uses numbered days of the month for watering instead of specific days of the week.
- Press the button until the icon is displayed.
- Press the right arrow button until the cursor is above either ODD or EVEN on the display.
- Press the plus button to select, or the minus button to cancel either ODD or EVEN days to water.
- Once ODD or EVEN mode is activated it will be the only cursor shown on the display.
Selecting Interval Days to Water
- Press the button until the icon is displayed.
- Press the right arrow button until the cursor is above INT on the display.
- Press the plus button and a 1 will be flashing indicating the number of days between watering.
- Press the plus or minus button to select the number of days between watering days (1 to 31).
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.