Pro-C - Clearing Controller’s Memory/Resetting Controller

If want to clear the memory on your controller and start from fresh or if your controller is not responding to your commands, you can reset the Pro-C.

 

Pro-C with Solar Sync dial position
  1. Press and hold the    program button.
  2. Press and release and the RESET button on the back of the front panel.
  3. Wait until the display shows 12:00 am.
  4. Release the    button.

The controller is now ready to be reprogrammed.

Pro-C (2009 - 2014) with Seasonal Adjust Dial Position
  1. Turn the dial to the RUN
  2. Position Press and hold the   button.
  3. Press and release the RESET button on the back of the front panel.
  4. Wait until the display shows 12:00a.m.
  5. Release the   button.
  6. The display will show 12:00a.m.

The controller is now ready to be reprogrammed.

Pro-C (2009 or older) with Manual All Station dial position
  1. Turn the dial to the RUN position.
  2. Remove the 9V battery.
  3. Press and hold the , and program buttons simultaneously.
  4. Press and release the Reset button on the back of the front panel.
  5. Release all three buttons when you see 12:00a.m. on the display.

The controller is now ready to be reprogrammed.

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support