Sprinkler Body Support

Welcome to the spray support section. The term spray usually covers a traditional spray nozzle on a pop-up or fixed body. In this section you will find information on how to adjust, replace, maintain and troubleshoot Hunter sprays.

  • PS Ultra Installation
    Warning: Before installing spray bodies, always remember to ensure you have a good irrigation design plan and enough pressure for the sprays with good head to head coverage. If you
  • Pro-Spray Installation
    Warning: Before installing spray bodies, always remember to ensure you have a good irrigation design plan and enough pressure for the sprays with good head to head coverage. If you
  • Drain Check Valve Installation
     If your spray bodies are leaking water after the system (valve) is shut off, and the flow of water reduces over time, your heads are experiencing low head drainage. Low head
  • Reclaimed Cover
  • Spray Stays Up
    Here are some common reasons why a pop-up sprinkler may stay stuck up: Debris in the pop up body The riser is damaged The riser seal is
  • Wet Area at Sprinkler
    There are two reasons why there might be a wet spot around your sprinkler:The most common reason is called "Low Head Drainage." This is when the lowest head on the zone drains
  • Replace Wiper Seal
    Over time general usage can cause riser seals to wear out, similar to the wiper blades on a car, they require replacement. The signs of this are usually heads that have riser stems
  • No Pipe Dope
    Over the last few years we've had several customers call with questions regarding the effects of oil-based pipe dope compounds on the threads of Hunter sprinklers. In case you were
  • Pressure Gauge
  • Capping Off Head
  • Capping Off Irrigation Head in Ground
    Capping or removing a sprinkler is done differently depending on whether or not you live in an area that freezes and requires the irrigation system to be winterized. Winterizing
  • FloGuard
    FloGuard Technology supplements the robust, field-proven features and benefits of the Hunter Pro-Spray® family with an additional level of water savings. When the nozzle is removed
  • State Regulations
    State Regulations Hunter Pro-Spray PRS is the first EPA WaterSense certified spray body solution to legislation mandating pressure-regulation for sprays implemented in several

Find Hunter