MP Rotator® Nozzle - Stake Kit

Native plant restoration projects and subsurface drip irrigation systems often require temporary overhead watering to support delicate plants. To simplify temporary irrigation, two preassembled stake kits are available for use with high-efficiency MP Rotator Nozzles. Learn More

Installation

 

  1. Determine a layout of the desired nozzles based on head-to-head coverage. Lay laterals accordingly.
  2. Hammer the stake into the ground until secure (recommended depth: 12" (305 mm)). If necessary, drill a pilot hole for tougher soils.
  3. Install a ½" female-threaded fitting to the ½" male-threaded fitting on the MP Rotator Stake Kit supply tubing.
  4. Install the fitting to the lateral either parallel or perpendicular to grade.
  5. Flush the line and install the desired nozzle. 
Operating Specifications

 

Operational pressure range: 30 to 70 PSI (2.1 to 4.8 bar; 210 to 480 kPa)

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support