WFS - Specifications

Operating Specifications
Temperature Pressures Humidity
0 to 140ºF/60ºC up to 200 psi/13.7 bar up to 100%
Flow Range
Flow-Sync
Sensor
Diameter
Operating Range (Gpm)
  Minimum* Suggested Maximum**
1" 2 17
1½" 5 35
2" 10 55
3" 28 120
4" 34 195

* Minimum recommended flow for the highest flow zone for your system.

** Good design practice dictates the maximum flow not to exceed 5 ft/sec. Suggested maximum flow is based upon Class 200 IPS plastic pipe

Maximum Distance Between WFS Transmitter and Receiver 500 ft/150 m

Dimensions
FCT Tee Fitting Height Width Length Straight Pipe
upstream (Ø x 10)
Straight Pipe
downstream (Ø x 5)
FCT 100 4.8"/12 cm 2.3"/6 cm 4.5"/11 cm 10"/25 cm 5"/13 cm
FCT 150 5.4"/14 cm 2.3"/6 cm 4.6"/12 cm 15"/38 cm 8"/20 cm
FCT 158 5.4"/14 cm 2.3"/6 cm 5.1"/13 cm    
FCT 200 6″/15 cm 2.7"/7 cm 4.7"/14 cm 20"/50 cm 10"/25 cm
FCT 208 6"/15 cm 2.7"/7 cm 5.4"/14 cm    
FCT 300 7"/18 cm 4"/10 cm 6.2"/16 cm 30"/76 cm 15"/38 cm
FCT 308 7"/18 cm 4.2"/11 cm 6.4"/16 cm    
FCT 400 8"/20 cm 5"/13 cm 6.2"/16 cm 40"/1 m 20"/50 cm

WFS Calibration Factors

Hunter controllers allow selection of the correct pipe size by FCT model number. No further calibration is needed.

If "Other" is selected, K-factor and Offset information may be entered directly. Following are K-factor and offset values for best results with each available FCT model.

Flow Sensor Values
Hunter Flow Sensor K-Factor Offset
HFSFCT100 0.44 0.39
HFSFCT150 1.13 0.00
HFSFCT158 0.92 1.22
HFSFCT200 2.13 0.23
HFSFCT208 1.72 1.70
HFSFCT300 4.61 0.18
HFSFCT308 5.87 1.07
HFSFCT400 8.77 0.48

Ratings

WFS-R

For connection to Hunter controllers only
24 V~ 50/60 Hz 10 mA 0.02W
IP 43
Maximum Operating Temperature : 50 C

WFS-T

Batteries: 3 x 1.5 V AA or Hunter Lithium pack WFSLITHBATT
IP 67
Maximum Operating Temperature : 50 C

 

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support