Wireless Rain-Clik™ - Installation Instructions

1. Remove the sensor jumper across the two SEN terminals in the controller.
2. Attach the two yellow wires to the 24 VAC terminals.
3. Attach the blue wire to one SEN terminal and the white wire to the other SEN or SEN COM terminal.

Wiring the Receiver to Other Controllers: Normally Closed Sensor Applications

1. Attach the two yellow wires to the 24 VAC  terminals.
2. Attach the blue and white wire to the sensor terminals (if available) or in-line with the valve common  wire.

Reference Illustration

1. Common wire to all valves
2. Used for normally open sensor applications