A master valve is an automatic valve that is installed at the point where the irrigation system connects to the main water supply. You can use the WVOM with a normally-wired Pump/Master Valve output. When using the WVL to activate a master Valve, you must use the DC-latching solenoid (Hunter PN-458200 for Hunter valves).
If wireless control of a PMV output will be used, a jumper wire from the PMV terminal on the WVOM to the PMV output must be connected. See the figure below.
- Install the Jumper wire from the WVOM P/MV terminal to the P/MV Power Module terminal.
- Program the WVL for P/MV. Learn More
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.