MP Rotator Nozzle Support

Welcome to the MP Rotator Support section. The MP Rotator is a high efficiency-rotating nozzle that can replace a traditional spray nozzle. In this section you will find information on how to retrofit, adjust, maintain and troubleshoot the MP Rotator nozzles.

  • Installation
    MP Rotator Nozzles are installed on traditional pop-up sprinklers and stationary shrub adapters. All models are female-threaded for installation on the more common male-threaded
  • Standard MP Rotator Nozzles
    Featuring multi-stream technology and the lowest precipitation rate on the market, the MP Rotator Standard Nozzle is the most trusted high-efficiency nozzle solution, offering up
  • MP800 Nozzle
    The MP Rotator MP800 Nozzle offers a higher precipitation rate designed for small spaces and heavier water applications.ModelDescriptionMP-800SR-90MP Rotator Nozzle, 0.8 in/hr (20
  • Strip Nozzle
    MP Rotator Strip Nozzles offer a high-efficiency solution for irrigating narrow spaces.ModelDescriptionMP-LCS-515MP Rotator Nozzle, left corner strip, 5' to 15' (1.5 m x 4.5 m)
  • Adjustment
    MP Rotator Nozzles are shipped from the factory at the maximum radius setting and with the following arc settings:MP Rotator ModelFactory-Set Arc90° to 210°180°210° to 270°210°360

Run Times & Zoning

  • Run Times
    MP Rotator nozzles have a lower precipitation rate than typical spray nozzles, so your run times may need to be lengthened compared to traditional sprays. Run times with the MP
  • Zoning
    The MP Rotator Standard Nozzle Family has a matched precipitation rate of approximately 0.4 in/hr (10 mm/hr). This means any MP Rotator Standard model at any arc or radius can be

Tools & Accessories

  • Tools
    Use MP Rotator tools and accessories to optimize the uniformity and overall efficiency of irrigation systems.The MP Rotator Gauge, for instance, measures system pressure at the
  • Shut-Off
  • Stake Kit
    Native plant restoration projects and subsurface drip irrigation systems often require temporary overhead watering to support delicate plants. To simplify temporary irrigation, two
  • Filters
    With MP Rotator Nozzles, 80% of the filter can be plugged without a performance drop. MP Rotator Filters can be removed for cleaning and/or replacement. Please view the chart below
  • MP Side Strip Precipitation Rate
    When using the side strip nozzles, there are several different configurations that can be done with any given design. For this reason, we would recommend using the Total Area
  • Precipitation Rates
    What is the difference between the MP Rotator Standard and MP800 Nozzle Families?MP Rotator Standard Nozzles have the lowest precipitation rate in the industry at 0.4 in/hr (10 mm
  • Trajectory Chart
    The trajectory and spray height of the water stream leaving a sprinkler nozzle is important information when designing and installing irrigation systems.  These spray nozzle
  • Distance Coverage
    The MP Rotator's coverage distance depends on incoming pressure. You may not have the correct pressure if you are not achieving the desired distance.
  • Not Rotating

Find Hunter