Mini-Clik Support

Welcome to the Mini-Clik sensor support section. The Mini-Clik is a rain shut off of irrigation system during rain events. In this section you will find information on how to install, adjust and troubleshoot a Mini-Clik sensor.

  • Test Operation
    When testing the sensor always use a Manual ALL Stations or Manual Program Start. Under a Manual Single Station start the rain sensor will be ignored and the sensor will not shut
  • Introduction
    In most installations, the Wireless Mini-Clik sensor acts as a switch that breaks the circuit to an irrigation system’s solenoid valves in response to rain. This allows the timer
  • Components
  • Mounting
    Tips for Mounting the Sensor   -Choose a location such as the side of a building or post. The closer the transmitter is to the receiver, the better the reception. Do not
  • Wiring
  • Operation
  • Adjustments
    Please select from the following choices to assist you with your Wireless Min-Clik Sensor. Optional Quick Response® Technology - Immediate shutoff feature. Bypassing the
  • Troubleshooting Guide
    There is no required maintenance for the unit. The Mini-Clik does not have to be removed or covered for “winterizing” purposes. Problem The controller is
  • Sensor Not Turning Off the Sprinklers
    There are three possible reasons:The most common reason for non-activation on a Hunter rain sensor is the sensor itself has not encountered enough rain fall. Go out to the rain
  • Replacement Parts
    Find a Distributor PART NUMBER DESCRIPTION WM-CLIK-TR Wireless Mini-Clik Sensor transmitter only WR-CLIK-R Wireless Mini

Find Hunter