To maintain internet connectivity, you must activate a data plan after provisioning the network connection. This process should be completed by the controller owner, who will need to enter billing and payment information for the cellular data service. …

The Cellular Communication Module is used to connect ICC2 Controllers to Hunter’s Centralus™ Irrigation Management Platform. This 4G LTE communication module allows for wide-area connectivity to Centralus cloud-based control and provides an alternative to …

When using Centralus Software, you have the ability to change your STATION , BLOCK , and/or DELAY RUN TIMES . There is a maximum run time of 12:00 hrs for all model A2C controllers.  The minimum run time is 15 seconds for the decoder model and 1 …

Each program can have different types of WATER DAY schedules, and then have different settings with those types. Programs can be set according to one of the following modes: Days of Week:  This feature allows you to select days you would like to water for …

Centralus™ - LANKIT - Software Setup …

Hunter Industries presents a webinar on Sports Turf Irrigation Solutions … Sports Turf Irrigation Solutions …

The ICC2 model controller can be upgraded to Centralus software for web-based central control options. Installing the WiFi module kit (WIFIKIT) will allow access to all of the Centralus features.   IMPORTANT: Prior to installing the WiFi kit, it is …

After all the connections are completed, the WIFIKIT will have a single LED flashing red, which shows it is in connection mode. If the WIFIKIT has previously been connected or fails to connect, you will need to retry the connection. Press the black button …

Centralus™ - WIFIKIT - Software Setup …

Turn off the AC power to the controller.  Disconnect the ribbon cable from the power module in the upper left side of the controller.  Plug the LANKIT adapter into the power module.  Plug the ribbon cable from the facepack into the adapter. … Remove the …

Once all cables are plugged in and power is restored to the controller, the LANKIT will immediately begin searching for your internet access point. While the LANKIT is attempting to connect, the LEDs will initially blink multiple times, and then the …

The  FLOW  tab will display your real-time Current Flow as well as the Flow Totals (Daily, Weekly, Monthly, and Yearly). This feature easily allows you to manually set a single number (GPM) that is higher than the highest flow (GPM) zone on the system. …

The CONTROLLER LIST is an overview of all controllers in your system, displayed as either bars in a list view, or pins on a map. In a mobile view, you can switch between the two views using the buttons at the top right:           The controller list shows …

This section provides troubleshooting tips and answers to frequently asked questions that will be helpful when using the ICC2 and ACC2 Controllers with the Centralus Irrigation Management Platform. … If this message appears after you enter a controller's …

If a customer claims and purchases a subscription for an A2C-LTE device and no longer wants to have ownership of the device, there is the option to cancel the subscription. When a customer cancels a subscription, the plan status will change to CANCELING …

Centralus™ - Pro-C - Connect to Network …