Press the provisioning button on the PC-WIFI Module (as shown) to enable connection to the internet. The light on the Pro-C Controller front panel and the top light on the PC-WIFI Module will begin to flash GREEN.
Open the Wi-Fi settings on a computer, smartphone, or tablet and select the PRO-C2 network. The network name
will start with “PRO-C2_” and end with the serial number of the PC-WIFI Module.
After the PRO-C2 network is selected, a Hunter Network Connection screen will appear.
- Manually enter your local / home Wi-Fi network or select it from the Network list at the bottom of the screen. (Note: Click the Refresh Network button if your local network does not appear. If the network still does not appear, move the controller closer to the router and try again.)
- After the network is selected, enter the network password and press Connect.
- The LED light on the front panel of the Pro-C Controller and the light on the PC-WIFI Module will turn solid green if the PC-WIFI Module was successfully connected to your local Wi-Fi network.
- The controller is now ready to connect to Centralus™ Software.
IMPORTANT: Ensure that you're connecting to a private network with 2.4 GHz connectivity. If the Hunter Network Connection screen does not automatically pop up after completing step 2, enter the following IP address in your internet browser: 192.168.7.7.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.