Wireless Valve Linking Support

The Wireless Valve Link enables wire-free valve control and monitoring for new, existing, and add-on valves in  ICC2 or HCC control systems.  Get the WVL app to get started! 

The Hunter WVOM (Wireless Valve Output Module) or WVOM-E (international versions) is designed for installation in a compatible controller output module slot.The WVOM installs like

The Wireless Valve Link enables wire-free valve control and monitoring for new, existing, and add-on valves in  ICC2 or HCC control systems.  Get the WVL app to get started! 

A master valve is an automatic valve that is installed at the point where the irrigation system connects to the main water supply. You can use the WVOM with a normally-wired Pump

The Repeater is designed for outdoor, solar-powered installation. It relays LoRa signals between Hunter wireless devices to extend wireless range and overcome obstacles to line-of

The Universal Antenna Extension Kit is beneficial for improving line-of-sight wireless communication for Wi-Fi, cellular, and LoRa radio communications. This kit (ANT-EXT-KIT) is

All WVOM/WVL information comes through the Bluetooth app. It is important to remember that the app is connected directly from the smartphone to the WVOM, but all field

Details will summarize the most recent information for each WVL in the system and the repeater if one is present. WVLs are reported together with their output station assignments.

The WVOM and the WVL models can be updated in the field, over the air (OTA), if new Firmware becomes available.Firmware updates are large downloads and can take up to 2 hours. Do

You can verify the radio coverage at the proposed installation/valve box site prior to installation.

All LoRa® radio communications between the Wireless Valve Output Module and the Wireless Valve Links (or Repeater) are two-way. Whenever the Wireless Valve Output Module sends a

ProblemCausesSolutionWVL Not WateringDead batteries.WVL not addressed.Improper solenoid or solenoid disconnected.WVL is out of communication range.Use the manual test function and

The Recovery Database feature is used when a WVOM must be replaced or exchanged with another device for service reasons. The replacement WVOM will have a different Site ID and

Hunter prefers using Hunter valves with Hunter DC-latching solenoids (P/N #458200) for best performance. However, existing irrigation systems can be retrofitted with another

Factory Reset is used to clear all programming out of a WVL controller, including station assignment, Site ID, and Channel ID.

This function will allow you to test the connected solenoid operation using the local manual start button in the battery compartment.

Item Description Catalog No. 1 Spare Plastic Parts Kit, WVL 10046600SP 2 Spare Ball Mount, RPT, SP-WVL, SP-NODEBT