| Feature | Where Found | Description |
|---|---|---|
| Programmable Sensor Override |
Hold – and turn to Start Times | Sets individual stations to ignore sensor shutdowns. Select stations with ◄ or ►, then use +/– to change to Off to ignore the sensor. |
| Cycle and Soak | Hold + and turn to Run Times; enter Cycle and press PRG to set Soak |
Sets max time a station can run at once and minimum time it must wait before another cycle. Divides run time into segments to prevent runoff. |
| Delay Between Stations |
Hold – and turn to Run Times | Inserts a delay (seconds or minutes) between stations in a run time for slow valves or recharging tanks. |
| Hide Programs | Hold – and turn to Water Days | Use +/– to change from 4 to 1 to hide extra programs. 1 will show only Program A, start time 1. 4 will show all programs (A, B, C) and 4 start times per program. |
| Solar Sync Delay | Hold + and turn to Solar Sync | Sets number of days before the Solar Sync Sensor begins adjusting run times. Allows landscape establishment for a set period of days before the sensor begins adjusting automatically. |
| Clik Delay | Hold + and turn to Off | Set number of days for watering to remain off after sensor has been activated and restored. |
| Total Run Time | Turn to Run Times; press ◄ when station 1 is shown and PRG to select other programs |
Calculates and displays the total of all run times in a program start time. |
| Test Program | Hold PRG 3 seconds | Runs all stations in the controller for the time entered for test or diagnostic purposes. |
| Easy Retrieve® Memory |
Hold + and PRG to Save Hold – and PRG to Restore |
Saves all program information to restore at a later time. |
| Total Reset | Press PRG and Reset button | Erases all watering information. |
| Quick Check™ Technology |
+, –, ◄, ► together, then + | Checks all stations for wiring problems. |
| Run Program | Hold ►, PRG to select | Runs all stations in selected program; use ► to advance to next station. |
| Seconds Mode Run Times |
Hold + and turn to Start Times | Optional Seconds Mode allows for seconds of Run Time resolution, up to 5 minutes. Press + and - buttons to toggle between Seconds and Minutes Modes. |
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.