ST-1600-KIT
الموديلات
المرشح
إرتفاع القافز
خيار قوس الري
نصف القطر
Nozzle Type
Flow Rate
Inlet Size
Inlet Type
Outlet Type
Outlet Style
Lay Length
Nozzle Option
Emitter Spacing
Coil Length
الموديل | الوصف | إضافة إلى القائمة |
---|---|---|
ST-1600-HS-B | رشاش العشب الصناعي Synthetic turf الدوَّار، 5 بوصة، قابل للتعديل من 40 إلى 360 درجة، فتحة داخل بسن حلزوني بريطاني 5 سم، أنبوب منبثق من الفولاذ المقاوم للصدأ، عالي السرعة، تقنية Total-Top-Service، يأتي مع ستة نوزلات (16-26)؛ للاستخدام مع ST-1600-KIT | + |
ST-243636-B | ملحق العشب الصناعي، غرفة تجميع، مجهزة مسبقًا بفتحة للرشاش الدوار، ومنافذ للوصول السريع للوصلة السريعة، ومحدد وضع: تشغيل وإيقاف وتلقائي؛ للاستخدام مع ST-1600-KIT | + |
ST-BKT-1600 | ملحق العشب الصناعي، حامل تعليق الرشاش الدوار لغرفة التجميع وحامل لضبط الدرجة للرشاش الدوَّار ST-1600-HS-B؛ للاستخدام مع ST-1600-KIT | + |
ST-BKT-QCV | ملحق العشب الصناعي، دعامة تعليق للوصلة السريعة؛ للاستخدام مع ST-1600-KIT | + |
ST-BVF30-K | ملحق العشب الصناعي، محبس فراشة مشعب، ومجموعة التركيب والإقران Victaulic®؛ للاستخدام مع ST-1600-KIT | + |
ST-H30-K | ملحق العشب الصناعي، خرطوم إدخال مشعب مرن بغلاف خارجي من ضفائر الفولاذ المقاوم للصدأ مقاس 8 سم × 215 سم، فتحة داخل أنثى بسن حلزوني أمريكي مقاس 8 سم × مخرج Victaulic مقاس 8 سم؛ للاستخدام مع مجموعة ST-1600-KIT | + |
ST-IBS-1600 | ملحق العشب الصناعي، مجموعة الغطاء المطاطي (Rubber Cover Kit) للنظام الحاجز لأرضيات العشب الطويل (Infill Barrier System) الخاصة بالرشاش الدوار ST-1600-HS-B؛ تُستخدمُ مع المجموعة ST-1600-KIT | + |
ST-SPT-K | ملحق العشب الصناعي، حامل دعم مشعب قابل للضبط؛ مطلوب اثنان لكل غرفة تجميع؛ يُستخدمُ مع المجموعة ST-1600-KIT | + |
HQ-5-RC | وصلة سريعة التوصيل HQ، وفتحة داخل أنثى 1 بوصة (25 مم)، هيكل من قطعة واحدة، متوافقة مع المفتاح HK-55، وصلة دوارة للخرطوم HS-1 أو HS-2، غطاء أصفر | + |
Create a new My List.
اتصل بالموزع المحلي لديك؛ لمعرفة إن كان المنتج متوفر ويمكن طلبه أم لا.
المواصفات
Operating Specifications
- Radius: 107' to 165'
- Flow: 96.2 to 326.8 GPM
- Operating pressure range: 60 to 120 PSI
- Precipitation rate: 2.25 in/hr approximately
User-Installed Options
- Simulated concrete cover for attachment for flattened IBS (used with vault): P/N ST-FRP-1600
- ST approved adhesive for attaching artificial turf, track, or ST-FRP-1600 to infill barrier system: P/N ST-ADH-K
- ST-1600 Short-Radius Nozzle Kit: P/N959900
- DC-Latching Solenoid Kit: P/N ST-LSA
الميزات
The Hunter ST-1600-KIT is the first and only fully integrated solution designed to exceed the unique needs of the synthetic turf irrigation market. This versatile offering features an exclusive IBS Infill Barrier System that accommodates every field surface configuration, including infill turf, short non-infill turf, synthetic running track, and in-concrete installations. It also comes standard with our legendary gear-driven rotor technology for reliable, long-term performance.
All irrigation components are accessible through the top, making maintenance simple while keeping the surface intact, playable, and safe. The kit also includes a durable manifold featuring 3" galvanized ductile iron components with heavy-duty, grooved Victaulic™ type fittings. Combined with a slow-opening, low-pressure-loss control valve, isolation valve, drain valve, and quick coupler valve, you get the most robust and powerful system of its kind.
To provide a complete product specification, designers simply need to specify the kit. Ordering is a snap too, thanks to a handy system reference guide that list all the components installers and distributors need.
ST-1600-KIT Components
FIGURE | COMPONENTS TO ORDER | QTY | ITEM DESCRIPTION |
1 | ST-1600-HS-B | 1 | High-speed pop-up, adjustable arc (40°–360°), 2" BSP inlet |
2 | ST-243636-B | 1 | Composite vault, precast hole for rotor and two quick-access ports for quick coupler and remote on-off-auto selector |
3 | ST-BKT-1600 | 1 | Rotor vault hanger and grade adjustment bracket for ST-1600-HS-B Rotor |
4 | ST-BVF30-K | 1 | Manifold butterfly valve and Victaulic® coupling fitting kit |
5 | ST-V30-KV | 1 | 3" metal control valve, 3" grooved Victaulic inlet/outlet fittings, solenoid, and on-off-auto selector manifold |
6 | ST-H30-K | 1 | Ultra-flexible 3" x 26" stainless steel corrugated manifold inlet hose with stainless steel braided outer support layer with 3" female NPT inlet |
7 | ST-SPT-K | 2 | Adjustable manifold support stand; two required per vault |
8 | ST-IBS-1600 | 1 | Infill barrier system Rubber Cover Kit for ST-1600-HS-B Rotor |
9 | ST-BKT-QCV | 1 | Hanger bracket for HQ-5-RC Quick coupler |
10 | HQ-5R-C | 1 | Quick coupler, 1" NPT inlet, 1¼" outlet for key |
الميزات الأساسية
الميزات المتقدمة
- ST Infill Barrier System
ST-IBS-1600
The unique IBS Rubber Cover Kit includes vertical rubber barriers to retain infill material creating a safe transition where the rotor pops up. The IBS can also be trimmed to create a flat exposed surface area.Infill Turf Example
Synthetic Track Example
Non-Infill Hockey Turf
Bare Cover Option
ST-FRP-1600 - ST Adjustable Hanger Bracket
ST-BKT-1600
This bracket supports the rotor within the vault and provides vertical elevation adjustments allowing for a perfect surface transition. - ST Manifold and Isolation Valve
ST-BVF30-K
Rated to 500 PSI working pressure, this 3" galvanized ductile iron assembly includes Victaulic™ type grooved connections, a butterfly isolation valve, a point of connection for the quick coupler, and a 1" brass drain valve. - ST Low-Loss, Slow-Opening Valve
ST-V30-KV: Heavy-duty control valve.
Valve: 3" grooved Victaulic type
Pressure loss: Ultra low (1.5 PSI at 325 GPM)
Manual control: Remote On-Off-Auto Selector and solenoid (not shown) - ST Flexible Stainless Inlet Hose
ST-H30-K
3" ultra-flexible stainless steel corrugated hose with stainless steel support braiding. Provides for minor offset and alignment of sub-mainline to the ST Manifold's inlet connection.
ST-BKT-QCV
Bracket assures firm stabilization of quick coupler by attaching directly to the vault.
ST-SPT-K
Adjustable support stands include a large footprint base made from recycled tire rubber and a 2" vertically adjustable support rail (two required under manifold).
Open access to all components for ease of ongoing maintenance.
Smooth and safe surface area with quick-access ports.
Heavy-duty tapered fiberglass and polymer-concrete construction with precast holes for rotor, quick coupler valve, and remote on-off-auto selector manifold assembly.
The ST-V30-KV valve kit includes a remotely located On-Off-Auto selector and solenoid manifold assembly. These convenient features bring valve manual control functions and solenoid splice connections closer to the surface for easy access.
Quick couplers provide a convenient source of water for washing down spills and water-soluble paint. Integrated in-vault design eliminates the need for additional quick coupler enclosures.
Blends in perfectly with the surrounding synthetic surface.
جداول
ST-1600 Nozzle Performance Data | |||||||
---|---|---|---|---|---|---|---|
Nozzle | Pressure PSI |
Radius ft. |
Flow GPM |
Precip in/hr | |||
16 |
60 |
107 |
96.2 |
1.63 |
1.88 |
||
75 |
115 |
107.3 |
1.57 |
1.81 |
|||
90 |
121 |
117.8 |
1.54 |
1.78 |
|||
105 |
128 |
127.3 |
1.50 |
1.73 |
|||
120 |
135 |
137.4 |
1.46 |
1.69 |
|||
18 |
60 |
112 |
107.0 |
1.66 |
1.91 |
||
75 |
121 |
119.4 |
1.56 |
1.80 |
|||
90 |
128 |
131.0 |
1.54 |
1.78 |
|||
105 |
133 |
141.3 |
1.54 |
1.78 |
|||
120 |
141 |
153.2 |
1.48 |
1.71 |
|||
20 |
60 |
115 |
144.0 |
2.10 |
2.43 |
||
75 |
128 |
160.9 |
1.89 |
2.18 |
|||
90 |
141 |
176.5 |
1.71 |
1.97 |
|||
105 |
144 |
190.5 |
1.76 |
2.03 |
|||
120 |
148 |
204.2 |
1.80 |
2.08 |
|||
22 |
60 |
118 |
171.5 |
2.37 |
2.73 |
||
75 |
130 |
191.8 |
2.20 |
2.54 |
|||
90 |
144 |
210.0 |
1.94 |
2.24 |
|||
105 |
154 |
226.9 |
1.84 |
2.12 |
|||
120 |
157 |
243.1 |
1.89 |
2.18 |
|||
24 |
60 |
121 |
202.1 |
2.64 |
3.05 |
||
75 |
133 |
225.9 |
2.46 |
2.84 |
|||
90 |
148 |
247.6 |
2.19 |
2.52 |
|||
105 |
156 |
267.4 |
2.12 |
2.45 |
|||
120 |
160 |
286.4 |
2.16 |
2.49 |
|||
26 |
60 |
126 |
233.2 |
2.83 |
3.27 |
||
75 |
136 |
260.4 |
2.71 |
3.13 |
|||
90 |
151 |
284.5 |
2.40 |
2.77 |
|||
105 |
160 |
307.0 |
2.31 |
2.67 |
|||
120 |
165 |
326.8 |
2.32 |
2.68 |
|||
Note: All precipitation rates are calculated for 180° operation. For the precipitation rate of a 360° sprinkler, divide by 2. |
ST-1600 Short-Radius Nozzle Kit Performance Chart | |||||||
---|---|---|---|---|---|---|---|
Nozzle | Pressure | Radius | Flow | Precipitation in/hr | |||
PSI | ft | GPM | |||||
8 | 60 | 70 | 23.3 | 0.92 | 1.06 | ||
70 | 72 | 25.5 | 0.95 | 1.09 | |||
90 | 74 | 27.3 | 0.96 | 1.11 | |||
100 | 76 | 29.2 | 0.97 | 1.12 | |||
10 | 60 | 81 | 37.8 | 1.11 | 1.28 | ||
70 | 84 | 42.5 | 1.16 | 1.34 | |||
90 | 86 | 47.1 | 1.23 | 1.42 | |||
100 | 88 | 51.0 | 1.27 | 1.46 | |||
12 | 60 | 92 | 53.9 | 1.23 | 1.42 | ||
70 | 94 | 60.5 | 1.32 | 1.52 | |||
90 | 96 | 65.7 | 1.37 | 1.58 | |||
100 | 98 | 71.8 | 1.44 | 1.66 | |||
14 | 60 | 103 | 69.3 | 1.26 | 1.45 | ||
70 | 105 | 78.2 | 1.37 | 1.58 | |||
90 | 108 | 85.5 | 1.41 | 1.63 | |||
100 | 110 | 92.5 | 1.47 | 1.70 |